Shoring prop-Light Duty
Lýsing
Léttir leikmunir are used for supporting work in buildings construction, with working height range from 0,50-0,80 m up to 3,00-5,50 m.
Two end plates, upper and lower plates, serve to give stability to the steel prop.
The inner tube is Ø 48mm / 40mm (thickness from 2 mm to 4.0mm) with holes to adjust the working height with help of the pin.
The outer tube is Ø56mm / 60mm (thickness from 1.6 mm to 2.5mm).
The pin diameter is between 12 and 14 mm, with a special design that does not allow its fall.
The thread is covered by a cup-type nut (internal thread) that has 2 side handles for easy handling (Cast nut with external thread is also available.).
A steel ring plate is also equipped on the nut that prevents concrete materials falling into the nut and get stuck.
Forskrift
Hæð svið: 1,5m-3,0m, 2,0m-3,5m, 2,2m-4,0m, 3,0m-5,5m
Innri rör þvermál (mm): 40/48/60
Ytra rör þvermál (mm): 48/56/60/75
Wall thickness: from 1.6mm to 3.0mm
Adjustable device: Nut style, Cup style
Surface finished: painted / galvanized
Sérkröfur fáanlegar sé þess óskað.
Hæð svið (m) |
Ytra rör (mm) |
Innra rör (mm) |
Þykkt (mm) |
Stillingartæki |
1,7m-3,0m |
60 / 57 / 48 |
48 / 40 |
1.6-4.0 |
Ext. þráður / Alþj. þráður |
2,0m-3,5m |
60 / 57 / 48 |
48 / 40 |
1.6-4.0 |
Ext. þráður / Alþj. þráður |
2,2m-4,0m |
60 / 57 / 48 |
48 / 40 |
1.6-4.0 |
Ext. þráður / Alþj. þráður |
2,5m-4,5m |
60 / 57 / 48 |
48 / 40 |
1.6-4.0 |
Ext. þráður / Alþj. þráður |
3,0m-5,5m |
60 / 57 / 48 |
48 / 40 |
1.6-4.0 |
Ext. þráður / Alþj. þráður |
Allir leikmunir geta virkað vel með Euro formwork kerfi.