Ringlock scaffolding system
ລາຍລະອຽດ
Made of high-strength steel tube, standards are the vertical members of Ringlock scaffolding system. Rosettes are welded on the standards every 0.5m intervals and provide the integral node connection, in which the wedge connectors assemble. Built-in spigots are equipped for end-to-end connections. A scaffold tube, 48.3 mm diameter and 3.25 mm wall thickness, can also be connected vertically to the posts.
The standards are compatible with other ringlock scaffolding systems. The standard provides the vertical support for scaffolding. The spigot is permanently fixed in place.
Ledgers ແມ່ນສະມາຊິກແນວນອນຂອງ Ringlock scaffolding. ພວກເຂົາເຈົ້າສະຫນອງການສະຫນັບສະຫນູນແນວນອນສໍາລັບການໂຫຼດແລະ planks.Ledgers ຍັງສາມາດຖືກນໍາໃຊ້ເປັນລົດໄຟກາງແລະເທິງຫຼື rails guards.
Diagonal Braces are used for the lateral bracing of Ringlock scaffolding system. They can also be used as compression and tension members for cantilevers where they transmit loads back into the main scaffold structure. Diagonal Braces are also used for handrails in the Ringlock Steel Stair System. Other sizes are available on request.
ວົງເລັບກະດານ Ringlock ແມ່ນຕິດກັບ rosette ມາດຕະຖານແນວຕັ້ງສໍາລັບການວາງຕໍາແຫນ່ງກະດານ scaffold. ວົງເລັບກະດານ ringlock ເຫຼົ່ານີ້ແມ່ນໃຊ້ຮ່ວມກັນກັບແຜ່ນເຫຼັກ scaffold ແລະ rails guards ທີ່ເຫມາະສົມທີ່ຍອມຮັບບັນຊີລາຍການແນວນອນ. ພວກເຂົາເຈົ້າອະນຸຍາດໃຫ້ທ່ານເຮັດວຽກໃກ້ຊິດກັບໂຄງສ້າງຂອງທ່ານ.
ຂໍ້ມູນຈໍາເພາະ
ທໍ່ວັດສະດຸ |
ທໍ່ເຫລໍກທີ່ມີຄວາມເຂັ້ມແຂງສູງ 48.3mm X 3.0mm / 3.25mm |
ເກຣດເຫຼັກ |
Q235 ຫຼື Q345 |
ຄວາມຍາວມາດຕະຖານ |
L=4000mm, 3000mm, 2500mm, 2000mm, 1500mm, 1000mm, 500mm |
ຄວາມຍາວຂອງບັນຊີລາຍການ |
L=3000mm, 2500mm, 2000mm, 1500mm, 1200mm, 1000mm |
ໄລຍະຫ່າງຂອງ Rosette |
500mm, |
ການສໍາເລັດຮູບພື້ນຜິວ |
HDG, ສັງກະສີ, ເຄືອບຝຸ່ນ |
ຂະໜາດອື່ນໆ |
ຂະຫນາດທີ່ກໍາຫນົດເອງແມ່ນມີຢູ່ໃນຄໍາຮ້ອງຂໍພິເສດ |