Shoring prop-Light Duty
Whakaahuatanga
Nga taputapu mahi mama are used for supporting work in buildings construction, with working height range from 0,50-0,80 m up to 3,00-5,50 m.
Two end plates, upper and lower plates, serve to give stability to the steel prop.
The inner tube is Ø 48mm / 40mm (thickness from 2 mm to 4.0mm) with holes to adjust the working height with help of the pin.
The outer tube is Ø56mm / 60mm (thickness from 1.6 mm to 2.5mm).
The pin diameter is between 12 and 14 mm, with a special design that does not allow its fall.
The thread is covered by a cup-type nut (internal thread) that has 2 side handles for easy handling (Cast nut with external thread is also available.).
A steel ring plate is also equipped on the nut that prevents concrete materials falling into the nut and get stuck.
Whakatakotoranga
Awhe teitei: 1.5m-3.0m, 2.0m-3.5m, 2.2m-4.0m, 3.0m-5.5m
ngongo o roto dia(mm): 40/48/60
Dia ngongo waho(mm): 48/56/60/75
Wall thickness: from 1.6mm to 3.0mm
Adjustable device: Nut style, Cup style
Surface finished: painted / galvanized
Ko nga whakaritenga motuhake e waatea ana i runga i te tono.
Awhe Teitei (m) |
ngongo waho (mm) |
ngongo o roto (mm) |
Mātotoru (mm) |
Te whakatikatika i te taputapu |
1.7m-3.0m |
60 / 57 / 48 |
48 / 40 |
1.6-4.0 |
Ext. miro / Int. miro |
2.0m-3.5m |
60 / 57 / 48 |
48 / 40 |
1.6-4.0 |
Ext. miro / Int. miro |
2.2m-4.0m |
60 / 57 / 48 |
48 / 40 |
1.6-4.0 |
Ext. miro / Int. miro |
2.5m-4.5m |
60 / 57 / 48 |
48 / 40 |
1.6-4.0 |
Ext. miro / Int. miro |
3.0m-5.5m |
60 / 57 / 48 |
48 / 40 |
1.6-4.0 |
Ext. miro / Int. miro |
Ka taea e nga taputapu katoa te mahi pai me nga punaha Euro formwork.