Shoring prop-Light Duty
Beskrivelse
Lett bruk rekvisitter are used for supporting work in buildings construction, with working height range from 0,50-0,80 m up to 3,00-5,50 m.
Two end plates, upper and lower plates, serve to give stability to the steel prop.
The inner tube is Ø 48mm / 40mm (thickness from 2 mm to 4.0mm) with holes to adjust the working height with help of the pin.
The outer tube is Ø56mm / 60mm (thickness from 1.6 mm to 2.5mm).
The pin diameter is between 12 and 14 mm, with a special design that does not allow its fall.
The thread is covered by a cup-type nut (internal thread) that has 2 side handles for easy handling (Cast nut with external thread is also available.).
A steel ring plate is also equipped on the nut that prevents concrete materials falling into the nut and get stuck.
Spesifikasjon
Høydeområde: 1,5m-3,0m, 2,0m-3,5m, 2,2m-4,0m, 3,0m-5,5m
Innerrør dia(mm): 40/48/60
Ytre rørdiameter(mm): 48/56/60/75
Wall thickness: from 1.6mm to 3.0mm
Adjustable device: Nut style, Cup style
Surface finished: painted / galvanized
Spesielle krav tilgjengelig på forespørsel.
Høydeområde (m) |
Ytterrør (mm) |
Slange (mm) |
Tykkelse (mm) |
Justeringsenhet |
1,7m-3,0m |
60 / 57 / 48 |
48 / 40 |
1.6-4.0 |
Ext. tråd / Int. tråd |
2,0m-3,5m |
60 / 57 / 48 |
48 / 40 |
1.6-4.0 |
Ext. tråd / Int. tråd |
2,2-4,0m |
60 / 57 / 48 |
48 / 40 |
1.6-4.0 |
Ext. tråd / Int. tråd |
2,5m-4,5m |
60 / 57 / 48 |
48 / 40 |
1.6-4.0 |
Ext. tråd / Int. tråd |
3,0m-5,5m |
60 / 57 / 48 |
48 / 40 |
1.6-4.0 |
Ext. tråd / Int. tråd |
Alle rekvisitter kan fungere godt med Euro-forskalingssystemer.