ଫର୍ମୱାର୍କ ଚ CB ିବା CB240 |
ବର୍ଣ୍ଣନା
Platform width: 2.4m
Roll-back system: 70 cm with carriage and rack system
Finishing platform: for removing the climbing cone, polishing concrete surface etc.
Anchor system: should be pre-fixed into the formwork and left in the concrete after pouring.
Formwork: can be moved horizontally, vertically and tilted to meet site requirement.
Main platform: provide workers a safe working platform
Finishing platform: there is an access to the main platform by using a safety ladder.
ସୁବିଧା
- ସମସ୍ତ କନଷ୍ଟ୍ରକସନ କାନ୍ଥ ଫର୍ମୱାର୍କ ସହିତ ସୁସଙ୍ଗତ |
- ବ୍ରାକେଟ୍ ଏବଂ ଫର୍ମୱାର୍କ ପ୍ୟାନେଲରେ ଗଠିତ ସେଟ୍ ଗୁଡିକ ପରବର୍ତ୍ତୀ ing ାଳିବା ଷ୍ଟେପ୍ କୁ ଏକ କ୍ରେନ୍ ଲିଫ୍ଟ ସହିତ ସ୍ଥାନାନ୍ତରିତ |
- ସିଧା, ପ୍ରବୃତ୍ତ ଏବଂ ବୃତ୍ତାକାର କାନ୍ଥ ସହିତ ଯେକ any ଣସି ସଂରଚନା ସହିତ ଅନୁକୂଳ |
- ବିଭିନ୍ନ ସ୍ତରରେ କାର୍ଯ୍ୟ ପ୍ଲାଟଫର୍ମ ନିର୍ମାଣ କରିବା ସମ୍ଭବ ଅଟେ | ସୁରକ୍ଷା ସିଡ଼ି ଦ୍ୱାରା ପ୍ରଦତ୍ତ ପ୍ଲାଟଫର୍ମକୁ ପ୍ରବେଶ |
- ସମସ୍ତ ବ୍ରାକେଟ୍ ହ୍ୟାଣ୍ଡ୍ରେଲ୍, ପୁସ୍-ପଲ୍ପ୍ରୋପ୍ ଏବଂ ଅନ୍ୟାନ୍ୟ ଆନୁଷଙ୍ଗିକ ଫିକ୍ସିଂ ପାଇଁ ସମସ୍ତ ସଂଯୋଜକ ଅନ୍ତର୍ଭୁକ୍ତ କରେ |
- ଆରୋହଣକାରୀ ବ୍ରାକେଟ୍ ଗୁଡିକ ଏକ ରଥ ଏବଂ ଏକ ର୍ୟାକ୍ ଦ୍ formed ାରା ଗଠିତ ଏକ ସିଷ୍ଟମକୁ ବ୍ୟବହାର କରୁଥିବା ଫର୍ମୱାର୍କ ପ୍ୟାନେଲଗୁଡ଼ିକୁ ଗାଡ଼ି-ବ୍ୟାକ୍ କରିବାକୁ ଅନୁମତି ଦେଇଥାଏ |
- Formwork’s vertical adjusting and plumbing is completedwithleveling screw jacks and push-pull props.
- ବ୍ରାକେଟ୍ ଗୁଡିକ ଆଙ୍କର୍ କୋନ୍ ସିଷ୍ଟମ୍ ସହିତ କାନ୍ଥରେ ଲଙ୍ଗର |
ଆରୋହଣ ପ୍ରକ୍ରିୟା |
The first pouring is to be completed by using the proper wall elements and has to be exactly ଆଡଜଷ୍ଟ୍ ଷ୍ଟ୍ରଟ୍ସ ସହିତ ସମାନ୍ତରାଳ | |
ପଦାଙ୍କ 2 The completely pre-assembled climbing scaffold units consisting of climbing brackets with plank bottom and bracing have to be attached to the bracket anchoring and secured. Then the formwork and the move-off carriage together with the aligning beam has to be positioned on the brackets and fixed. |
ପଦାଙ୍କ 3 After shifting the climbing scaffold unit to the next pouring position the finishing platform is to be mounted to the brackets to complete the climbing system. |
ପଦାଙ୍କ 4 Release and remove bolts that fixing the positioning anchor point. ଟାଇ-ରଡ୍କୁ ବନ୍ଦ କରି କା remove ଼ିଦିଅ | Loosen the wedges of the carriage unit. |
ପଦାଙ୍କ 5 Retract the carriage and lock it with wedge. ଉପର ଚ imb ଼ିବା କୋଣଗୁଡିକ ସଂସ୍ଥାପନ କରନ୍ତୁ | ପବନ ସୁରକ୍ଷିତ ଉପକରଣ, ଯଦି ଅଛି ନିମ୍ନ ଚ imb ଼ିବା କୋଣକୁ ବାହାର କରନ୍ତୁ |
|
ପଦାଙ୍କ 6 Adjust the carriage into the common center of gravity and lock it again. ଭୂଲମ୍ବ ୱାଲିଙ୍ଗ ସହିତ କ୍ରେନ୍ ସ୍ଲିଙ୍ଗ୍ ସଂଲଗ୍ନ କରନ୍ତୁ | ବ୍ରାକେଟ୍ ର ସୁରକ୍ଷା ବୋଲ୍ଟ ହଟାନ୍ତୁ | Lift the climbing bracket by crane and attach it to the next prepared climbing cone. ପୁନର୍ବାର ସୁରକ୍ଷା ବୋଲ୍ଟ ସନ୍ନିବେଶ କରନ୍ତୁ ଏବଂ ଲକ୍ କରନ୍ତୁ | ଯଦି ଆବଶ୍ୟକ ହୁଏ, ପବନ-ଲୋଡ୍ ଉପକରଣ ସଂସ୍ଥାପନ କରନ୍ତୁ | |
ପଦାଙ୍କ 7 Move the carriage back and lock it by wedge. ଫର୍ମୱାର୍କ ସଫା କର | ସଶକ୍ତିକରଣ ଦଣ୍ଡିକା ସ୍ଥାପନ କରନ୍ତୁ | |
ପଦାଙ୍କ 8 Move the formwork forward until lower end rests against top of the finished section of the wall ପୁସ୍-ପଲ୍ ବ୍ରେସ୍ ମାଧ୍ୟମରେ ଭୂଲମ୍ବ ଭାବରେ ଫର୍ମୱାର୍କ ଆଡଜଷ୍ଟ୍ କରନ୍ତୁ | କାନ୍ଥ ଫର୍ମୱାର୍କ ପାଇଁ ଟାଇ-ରଡ୍ ଠିକ୍ କରନ୍ତୁ | |