Shoring prop-Heavy duty

Inogadziriswa simbi prop ye slab formwork
Simbi prop chinhu chakakosha chinotsigira cheHORIZON formwork system, kunyanya mune slab formwork. Iine iyo prop yakakwirira yekurodha huwandu, huremu hwakaderera uye kugadzikana, HORIZON slab formwork inoshanda zvakachengeteka uye nemazvo pasaiti pamwe nemutengo-unoshanda. Zvakare, iyo prop inokurumidza uye iri nyore kubata pane saiti.

Tumira email kwatiri Dhaunirodha sePDF

Product Detail

Product Sumo

Simbi prop chinhu chakakosha chinotsigira cheHORIZON formwork system, kunyanya mune slab formwork. Iine iyo prop yakakwirira yekurodha huwandu, huremu hwakaderera uye kugadzikana, HORIZON slab formwork inoshanda zvakachengeteka uye nemazvo pasaiti pamwe nekudhura-inoshanda. Zvakare, iyo prop inokurumidza uye iri nyore kubata pane saiti.

Tsanangudzo	Kugona (KN)	Urefu (mm)	Iye (mm)	Huremu (Kg)
HZP30-300	30	1650-3000	75/60	20.9
HZP30-350	30	1970-3500	75/60	23.0
HZP30-400	30	2210-4000	75/60	25.0
HZP20-300	20	1650-3000	60/48	15.7
HZP20-350	20	1970-3500	60/48	16.6
HZP20-450	20	2460-4500	60/48	28.2
HZP20-500	20	2710-5000	60/48	30.5

Zvakanakira

1. High quality simbi machubhu inova nechokwadi chekutakura kwayo.
2. Kupedzwa kwakasiyana-siyana kunowanikwa, zvakadai se: galvanization inopisa-yakanyungudutswa, kutonhora kunotonhora, kuvhara kwehupfu uye kupenda.
3. Kugadzirwa kwakakosha kunodzivirira mushandi kuti asakuvadza maoko ake pakati pechubhu yemukati nekunze.
4. Ichubhu yemukati, pini uye nut inogadziriswa yakagadzirirwa kuchengetedzwa kubva pakusazvipira.
5. Nekukura kwakafanana kweplate uye chigadziko cheplate, misoro yeprop iri nyore kuisa mukati mechubhu yemukati uye kunze kwechubhu.
6. Mapallet akasimba anovimbisa kutakura nyore uye zvakachengeteka.
Important Instruction

Important Instructions:
• Once erection is finished, double-check the props before use.
• Respect the prop spacing in accordance with the project.
• Prop load capacities and engineer’s design must be observed.
• The load acting on the prop is vertical and centred. No horizontal loads act on the prop.
• Check formwork and prop erection before concrete pouring.
• Pouring has to be done from heights which do not cause strong shaking of the formwork or the props.
• Avoid the sudden emptying of the concrete bucket onto the formwork.
• Formwork stripping and prop removal is only carried out when the concrete strength is sufficiently high.
• Before starting any dismantling operation, check the state of the props.
• After removal, props should not be irregularly piled up.