Cruth balla

Faodaidh sùbailteachd àrd le beagan phrìomh phàirtean coinneachadh ri riatanasan togail sam bith. Beam fiodha H20, balla stàilinn, plywood agus clamp msaa. Faodar na co-phàirtean sin a chur còmhla airson a h-uile cruth, eadhon le ath-structaradh aonadan cruth-balla nuair a bhios atharrachadh tric air planaichean structar an togalaich.

Cuir post-d thugainn Luchdaich sìos mar PDF

Mion-fhiosrachadh toraidh

Tuairisgeul air pàipear-balla

HORIZON wall formwork consists of H20 timber beam, steel walings and other connecting parts. These components can be assembled formwork panels in different widths and heights, depending on the H20 beam length up to 6.0m.

The H20 beam is the basic component of all the elements, with nominal lengths of 0.9 m up to 6.0 m. It has an extremely high load-bearing capacity with a weight of only 4.80 kg/m, which results in fewer walings and tie positions. H20 timber beam can be applied to all wall heights and elements are assembled together appropriately according to each specific project.

Tha ballachan stàilinn a tha a dhìth air an dèanamh a rèir faid sònraichte pròiseict sònraichte. Bidh na tuill ann an cumadh fad-ùine anns na ballachan stàilinn agus luchd-ceangail balla a’ leantainn gu ceanglaichean teann caochlaideach leantainneach (teannachadh agus teannachadh). Tha a h-uile ceangal coiseachd ceangailte gu teann le bhith a’ ceangal ceangal-coiseachd agus ceithir prìneachan wedge.

Panel struts (also called “Push-pull prop) are mounted on the steel waling, helping formwork panels erection. The length of panel struts are selected according to the height of the formwork panels.

Using the top scaffold bracket, working and concreting platforms are mounted to the wall formwork.

This consists of: top scaffold bracket, planks, steel pipes and pipe couplers.

Feartan cruth-balla balla

Co-phàirtean	Diagram / dealbh	Sònrachadh / tuairisgeul
Pannal cruth balla		Airson a h-uile cruth-obrach dìreach
H20 sail fiodha		Làimhseachadh dìon-uisge Àirde: 200mm Leud: 80mm Fad: a rèir meud a 'bhùird
Coiseachd stàilinn		Peantaichte, còmhdaichte le pùdar [12 sianal stàilinn
Clamp flange		Galvanised Gus balla stàilinn agus giùlan H20 a cheangal
Strut pannal (prop push-pull)		Air a pheantadh Gus cuideachadh le togail pannal formwork
Ceangalaiche Waling 80		Air a pheantadh Air a chleachdadh airson co-thaobhadh pannalan formwork
Ceangal oisean 60x60		Air a pheantadh Air a chleachdadh airson cruth-obrach oisean a-staigh a chruthachadh le prìnichean wedge
Bàrr sgafaid àrd		Air a pheantadh, severs mar àrd-ùrlar obrach sàbhailteachd

circular wall formwork

curved wall formwork

flexible wall formwork

oem concrete wall formwork

oem curved wall formwork

oem flexible wall formwork

oem formworks for wall

oem wall formwork

oem wall formwork system

oem wall formworks

shear wall formwork

shear wall shuttering

vertical formwork for wall

wall formwork

wall shuttering

Ma tha ùidh agad anns na stuthan againn, faodaidh tu roghnachadh d’ fhiosrachadh fhàgail an seo, agus bidh sinn ann an conaltradh riut a dh’ aithghearr.