Shoring prop-Heavy duty

Ngwongwo nchara na-agbanwe agbanwe maka ụdị slab
Ngwongwo ígwè bụ ihe dị mkpa na-akwado usoro HORIZON, karịsịa na slab formwork. Site n'iji ikike ibu ihe dị elu, ịdị arọ na nkwụsi ike, HORIZON slab formwork na-arụ ọrụ n'enweghị nsogbu na nke ọma na saịtị yana ọnụ ahịa bara uru. Ọzọkwa, prop na-adị ngwa ma dị mfe maka njikwa na saịtị.

Zitere anyị email Budata dị ka PDF

Nkọwa ngwaahịa

Okwu Mmalite ngwaahịa

Ngwongwo ígwè bụ ihe dị mkpa na-akwado usoro HORIZON, karịsịa na slab formwork. Site n'iji ikike ibu ihe dị elu, ịdị arọ na nkwụsi ike, HORIZON slab formwork na-arụ ọrụ n'enweghị nsogbu na nke ọma na saịtị yana ọnụ ahịa bara uru. Ọzọkwa, prop na-adị ngwa ma dị mfe maka njikwa na saịtị.

Nkọwapụta	Ike (KN)	Ogologo (mm)	Ọ (mm)	Arọ (Kg)
HZP30-300	30	1650-3000	75/60	20.9
HZP30-350	30	1970-3500	75/60	23.0
HZP30-400	30	2210-4000	75/60	25.0
HZP20-300	20	1650-3000	60/48	15.7
HZP20-350	20	1970-3500	60/48	16.6
HZP20-450	20	2460-4500	60/48	28.2
HZP20-500	20	2710-5000	60/48	30.5

Uru

1. Igwe nchara ígwè dị elu na-eme ka ikike ya dị elu.
2. A na-emecha ihe dị iche iche, dị ka: galvanization na-ekpo ọkụ, galvanization oyi, mkpuchi ntụ ntụ na eserese.
3. Nhazi pụrụ iche na-egbochi onye na-arụ ọrụ imerụ aka ya n'etiti tube n'ime na n'èzí.
4. A na-emepụta tube dị n'ime, pin na aku a na-agbanwe agbanwe na-echebe ya pụọ na njedebe na-amaghị ama.
5. N'otu nha nke efere na efere isi, ndị isi prop na-adị mfe itinye n'ime tube dị n'ime na n'èzí.
6. Pallets siri ike na-eme ka njem ahụ dị mfe na n'enweghị nsogbu.
Important Instruction

Important Instructions:
• Once erection is finished, double-check the props before use.
• Respect the prop spacing in accordance with the project.
• Prop load capacities and engineer’s design must be observed.
• The load acting on the prop is vertical and centred. No horizontal loads act on the prop.
• Check formwork and prop erection before concrete pouring.
• Pouring has to be done from heights which do not cause strong shaking of the formwork or the props.
• Avoid the sudden emptying of the concrete bucket onto the formwork.
• Formwork stripping and prop removal is only carried out when the concrete strength is sufficiently high.
• Before starting any dismantling operation, check the state of the props.
• After removal, props should not be irregularly piled up.