Shoring prop-Light Duty

A na-eji ihe mkpuchi ọrụ HORIZON Light rụọ ọrụ n'ikpere mmiri n'ọtụtụ ebe ụlọ na ndị ahịa anyị na-enwe ekele maka arụmọrụ dị elu na ịdị mfe iji.

Ikike ibu dị elu na-eme ka HORIZON na-akwado nhọrọ kachasị elu na-enye ntụkwasị obi na nchekwa maka ọrụ owuwu ọ bụla.

A na-ekwe nkwa nke ọma site na iji ihe dị elu nke akụrụngwa, usoro mmepụta ihe na ọgwụgwọ ikpeazụ na-etinye aka na props. Ihe ndị a niile na-ebute iji nchekwa na arụ ọrụ nke ọma na saịtị. Emepụtara Telescopic Props dị ka ọkọlọtọ EN 1065 si dị.

Zitere anyị email Budata dị ka PDF

Nkọwa ngwaahịa

Nkọwa

Ihe eji arụ ọrụ dị mfe are used for supporting work in buildings construction, with working height range from 0,50-0,80 m up to 3,00-5,50 m.

Two end plates, upper and lower plates, serve to give stability to the steel prop.

The inner tube is Ø 48mm / 40mm (thickness from 2 mm to 4.0mm) with holes to adjust the working height with help of the pin.

The outer tube is Ø56mm / 60mm (thickness from 1.6 mm to 2.5mm).

The pin diameter is between 12 and 14 mm, with a special design that does not allow its fall.

The thread is covered by a cup-type nut (internal thread) that has 2 side handles for easy handling (Cast nut with external thread is also available.).

A steel ring plate is also equipped on the nut that prevents concrete materials falling into the nut and get stuck.

Nkọwapụta

Ogologo ogologo: 1.5m-3.0m, 2.0m-3.5m, 2.2m-4.0m, 3.0m-5.5m
Ọkụ n'ime dia (mm): 40/48/60
Mpụta tube dia (mm): 48/56/60/75
Wall thickness: from 1.6mm to 3.0mm
Adjustable device: Nut style, Cup style
Surface finished: painted / galvanized
Ọpụrụiche chọrọ dị mgbe arịrịọ.

Ogologo oke (m)	Mpụta tube (mm)	N'ime tube (mm)	Ọkpụrụkpụ (mm)	Ngwa na-edozi
1.7m-3.0m	60 / 57 / 48	48 / 40	1.6-4.0	Ext. eri / Int. eri
2.0m-3.5m	60 / 57 / 48	48 / 40	1.6-4.0	Ext. eri / Int. eri
2.2m-4.0m	60 / 57 / 48	48 / 40	1.6-4.0	Ext. eri / Int. eri
2.5m-4.5m	60 / 57 / 48	48 / 40	1.6-4.0	Ext. eri / Int. eri
3.0m-5.5m	60 / 57 / 48	48 / 40	1.6-4.0	Ext. eri / Int. eri