Shoring prop-Heavy duty

Ipropu yentsimbi ehlengahlengiswayo ye-slab formwork
Ipropu yentsimbi yinxalenye ebalulekileyo yenkxaso yenkqubo ye-HORIZON, ngakumbi kwi-slab formwork. Ngomthamo ophezulu wokulayisha wepropu, ubunzima obuphantsi kunye nokuzinza, i-HORIZON slab formwork isebenza ngokukhuselekileyo nangokufanelekileyo kwisiza kunye neendleko eziphantsi. Kwakhona, ipropu iyakhawuleza kwaye kulula ukuyiphatha kwindawo.

Thumela i-imeyile kuthi Khuphela njengePDF

Iinkcukacha zeMveliso

Intshayelelo yeMveliso

Ipropu yentsimbi yinxalenye ebalulekileyo yenkxaso yenkqubo ye-HORIZON, ngakumbi kwi-slab formwork. Ngomthamo ophezulu wokulayisha wepropu, ubunzima obuphantsi kunye nokuzinza, i-HORIZON slab formwork isebenza ngokukhuselekileyo nangokufanelekileyo kwisiza kunye neendleko eziphantsi. Kwakhona, ipropu iyakhawuleza kwaye kulula ukuyiphatha kwindawo.

Inkcazo	Umthamo (KN)	Ubude (mm)	Yena (mm)	Ubunzima (Kg)
HZP30-300	30	1650-3000	75/60	20.9
HZP30-350	30	1970-3500	75/60	23.0
HZP30-400	30	2210-4000	75/60	25.0
HZP20-300	20	1650-3000	60/48	15.7
HZP20-350	20	1970-3500	60/48	16.6
HZP20-450	20	2460-4500	60/48	28.2
HZP20-500	20	2710-5000	60/48	30.5

Iingenelo

1. Iityhubhu zetsimbi ezisemgangathweni ziqinisekisa umthamo wayo ophezulu wokulayisha.
2. Ukugqitywa kweendidi ezahlukeneyo zikhoyo, ezifana: i-galvanization edibeneyo eshushu, i-galvanization ebandayo, i-powder coating kunye nepeyinti.
3. Uyilo olukhethekileyo luthintela umqhubi ukuba angalimaza izandla zakhe phakathi kombhobho wangaphakathi nangaphandle.
4. I-tube yangaphakathi, ipini kunye ne-nut ehlengahlengiswayo yenzelwe ukukhuselwa ngokungazinzi.
5. Ngobukhulu obufanayo beplate kunye nesiseko seplate, iintloko zeprop kulula ukuzifaka kwi-tube yangaphakathi kunye ne-tube yangaphandle.
6. Iipalati ezinamandla ziqinisekisa ukuthutha ngokulula nangokukhuselekileyo.
Important Instruction

Important Instructions:
• Once erection is finished, double-check the props before use.
• Respect the prop spacing in accordance with the project.
• Prop load capacities and engineer’s design must be observed.
• The load acting on the prop is vertical and centred. No horizontal loads act on the prop.
• Check formwork and prop erection before concrete pouring.
• Pouring has to be done from heights which do not cause strong shaking of the formwork or the props.
• Avoid the sudden emptying of the concrete bucket onto the formwork.
• Formwork stripping and prop removal is only carried out when the concrete strength is sufficiently high.
• Before starting any dismantling operation, check the state of the props.
• After removal, props should not be irregularly piled up.