Ukwakhiwa kodonga

Ukuguquguquka okuphezulu kunye namacandelo ambalwa aphambili kunokuhlangabezana nazo naziphi na iimfuno zokwakha. I-Timber beam i-H20, i-iron yaling, i-plywood kunye ne-clamp njl.

Thumela i-imeyile kuthi Khuphela njengePDF

Iinkcukacha zeMveliso

Inkcazo yefom yodonga

HORIZON wall formwork consists of H20 timber beam, steel walings and other connecting parts. These components can be assembled formwork panels in different widths and heights, depending on the H20 beam length up to 6.0m.

The H20 beam is the basic component of all the elements, with nominal lengths of 0.9 m up to 6.0 m. It has an extremely high load-bearing capacity with a weight of only 4.80 kg/m, which results in fewer walings and tie positions. H20 timber beam can be applied to all wall heights and elements are assembled together appropriately according to each specific project.

Iintsimbi zentsimbi ezifunekayo ziveliswa ngokuhambelana nobude obukhethekileyo beprojekthi. Imingxuma emise okwexesha elide kwintsimbi yentsimbi kunye nezixhumi ezidibanisayo zikhokelela ekudibaneni okuguquguqukayo okuqhubekayo (uxinzelelo kunye noxinzelelo). Yonke i-waling joint idityaniswe ngokuqinileyo ngokudibanisa i-waling kunye nezikhonkwane ezine ze-wedge.

Panel struts (also called “Push-pull prop) are mounted on the steel waling, helping formwork panels erection. The length of panel struts are selected according to the height of the formwork panels.

Using the top scaffold bracket, working and concreting platforms are mounted to the wall formwork.

This consists of: top scaffold bracket, planks, steel pipes and pipe couplers.

Izinto ezenziwe ngodonga

Amacandelo	Umzobo / ifoto	Inkcazo / inkcazelo
Iphaneli yokwenziwa kodonga		Kuzo zonke iifomworks ezithe nkqo
H20 umqadi weTimber		Ukunyangwa kobungqina bamanzi Ukuphakama: 200mm Ububanzi: 80mm Ubude: ngokobungakanani betafile
Ukubetha kwentsimbi		Ipeyintiwe, igqunywe ngumgubo [12 umjelo wentsimbi
I-Flange clamp		Iigalvanized Ukudibanisa intsimbi yentsimbi kunye nemiqadi ye-H20
Ipaneli strut (Thala-tsala ipropu)		Ipeyintiwe Ukunceda ukumiswa kwephaneli yeformwork
Isidibanisi se-Waling 80		Ipeyintiwe Isetyenziselwa ukulungelelaniswa kweepaneli zeformwork
Isidibanisi sekona 60x60		Ipeyintiwe Isetyenziselwa ukwenza i-formwork yekona yangaphakathi kunye nezikhonkwane ze-wedge
Isibiyeli sesikafula esiphezulu		Ipeyintiwe, iiseva njengeqonga lokusebenza lokhuseleko