Shoring prop-Light Duty
wehewehe
Nā lako hana māmā are used for supporting work in buildings construction, with working height range from 0,50-0,80 m up to 3,00-5,50 m.
Two end plates, upper and lower plates, serve to give stability to the steel prop.
The inner tube is Ø 48mm / 40mm (thickness from 2 mm to 4.0mm) with holes to adjust the working height with help of the pin.
The outer tube is Ø56mm / 60mm (thickness from 1.6 mm to 2.5mm).
The pin diameter is between 12 and 14 mm, with a special design that does not allow its fall.
The thread is covered by a cup-type nut (internal thread) that has 2 side handles for easy handling (Cast nut with external thread is also available.).
A steel ring plate is also equipped on the nut that prevents concrete materials falling into the nut and get stuck.
Hōʻike
Laulā kiʻekiʻe: 1.5m-3.0m, 2.0m-3.5m, 2.2m-4.0m, 3.0m-5.5m
ʻO ka ʻili o loko (mm): 40/48/60
ʻO ka ʻili o waho (mm): 48/56/60/75
Wall thickness: from 1.6mm to 3.0mm
Adjustable device: Nut style, Cup style
Surface finished: painted / galvanized
Loaʻa ka koi kūikawā ma ke noi.
|
Kiʻekiʻe (m) |
Pupu waho (mm) |
Pupu loko (mm) |
mānoanoa (mm) |
Mea hoʻoponopono |
|
1.7m-3.0m |
60 / 57 / 48 |
48 / 40 |
1.6-4.0 |
Ext. thread / Int. kaulahao |
|
2.0m-3.5m |
60 / 57 / 48 |
48 / 40 |
1.6-4.0 |
Ext. thread / Int. kaulahao |
|
2.2m-4.0m |
60 / 57 / 48 |
48 / 40 |
1.6-4.0 |
Ext. thread / Int. kaulahao |
|
2.5m-4.5m |
60 / 57 / 48 |
48 / 40 |
1.6-4.0 |
Ext. thread / Int. kaulahao |
|
3.0m-5.5m |
60 / 57 / 48 |
48 / 40 |
1.6-4.0 |
Ext. thread / Int. kaulahao |
Hiki ke hana maikaʻi nā props āpau me nā ʻōnaehana formwork Euro.
china scaffolding and shoring system
china shoring prop
china shoring props
china shoring props for sale
china shoring scaffolding
china steel prop shoring posts
china telescopic shoring prop
oem shoring prop jack
scaffolding and shoring system
shoring and propping factory
shoring and propping manufacturer
shoring and propping manufacturers
shoring prop
shoring prop for slab formwork
telescopic shoring prop
