Paʻa pā

Hiki ke hoʻokō i nā koi kūkulu hale kiʻekiʻe me kekahi mau mea nui. ʻO ka lāʻau lāʻau H20, ka waling kila, ka plywood a me ka clamp etc.. Hiki ke hoʻohui ʻia kēia mau ʻāpana no nā ʻano like ʻole, ʻoiai me ka hoʻoponopono hou ʻana i nā ʻāpana hana pā i ka wā e hoʻololi pinepine ʻia ai nā hoʻolālā kūkulu hale.

E hoʻouna i ka leka uila iā mākou Hoʻoiho ma ke ʻano he PDF

Huahana Huahana

ʻO ka wehewehe ʻana o ka puka pā

HORIZON wall formwork consists of H20 timber beam, steel walings and other connecting parts. These components can be assembled formwork panels in different widths and heights, depending on the H20 beam length up to 6.0m.

The H20 beam is the basic component of all the elements, with nominal lengths of 0.9 m up to 6.0 m. It has an extremely high load-bearing capacity with a weight of only 4.80 kg/m, which results in fewer walings and tie positions. H20 timber beam can be applied to all wall heights and elements are assembled together appropriately according to each specific project.

Hana ʻia nā waling kila e like me nā lōʻihi i hoʻonohonoho pono ʻia. ʻO nā puka lōʻihi i loko o nā mea hoʻohui kila a me nā mea hoʻohui waling ka hopena i nā pilina paʻa mau ʻano (ka hoʻopaʻa ʻana a me ke kaomi). Hoʻopili paʻa ʻia kēlā me kēia hui waling e kahi mea hoʻohui waling a me nā pine wedge ʻehā.

Panel struts (also called “Push-pull prop) are mounted on the steel waling, helping formwork panels erection. The length of panel struts are selected according to the height of the formwork panels.

Using the top scaffold bracket, working and concreting platforms are mounted to the wall formwork.

This consists of: top scaffold bracket, planks, steel pipes and pipe couplers.

Nā mea hana pā

Nā ʻāpana	Diagram / kiʻi	Hōʻike / wehewehe
ʻO ka papa hana pā		No nā ʻano hana kuʻekuʻe a pau
H20 Kaola laau		Ua mālama ʻia ka wai Kiʻekiʻe: 200mm Laulā: 80mm Ka lōʻihi: e like me ka nui o ka pākaukau
Waling kila		Pena ʻia, uhi ʻia ka pauda [12 ala kila
Paʻi paʻi		Galvanized No ka hoʻohui ʻana i nā kaola kila a me nā kaola H20
Ke kuʻekuʻe panel (Push-pull prop)		Pena No ke kōkua ʻana i ke kūkulu ʻana o ka panel formwork
Huina Waling 80		Pena Hoʻohana ʻia no ka alignment panel formwork
Huina kihi 60x60		Pena Hoʻohana ʻia no ka hana ʻana i ka formwork kihi o loko me nā pine wedge
ʻO ka pale scaffold kiʻekiʻe		pena, severs ma ke kahua hana palekana