HORIZON wall formwork consists of H20 timber beam, steel walings and other connecting parts. These components can be assembled formwork panels in different widths and heights, depending on the H20 beam length up to 6.0m.

The H20 beam is the basic component of all the elements, with nominal lengths of 0.9 m up to 6.0 m. It has an extremely high load-bearing capacity with a weight of only 4.80 kg/m, which results in fewer walings and tie positions. H20 timber beam can be applied to all wall heights and elements are assembled together appropriately according to each specific project.

Beharrezko altzairuzko zuloak proiektu pertsonalizatutako luzera zehatzen arabera ekoizten dira. Altzairuzko zulo-konektoreen luzetarako formako zuloek etengabe aldagarriak diren lotura estuak sortzen dituzte (tentsioa eta konpresioa). Konektore-konektore bakoitza estuki lotuta dago eta lau ziri-pin baten bidez.

Panel struts (also called “Push-pull prop) are mounted on the steel waling, helping formwork panels erection. The length of panel struts are selected according to the height of the formwork panels.

Using the top scaffold bracket, working and concreting platforms are mounted to the wall formwork.

This consists of: top scaffold bracket, planks, steel pipes and pipe couplers.